How to Tune Your 2014 Bac Mono in Forza Horizon 4

How to Tune Your 2014 Bac Mono in Forza Horizon 4 – The best way to get the most out of your 2014 Bac Mono in Forza Horizon 4 is to tune it properly. Here’s a guide on how to do just that!

Checkout this video:

Introduction

Since its introduction in Forza Horizon 4, the 2014 Bac Mono has been one of the most popular cars in the game. Thanks to its great handling and exhaust note, the Mono is a blast to drive. However, like any car, it can be improved with a little tuning. In this article, we’ll show you how to get the most out of your Mono in Forza Horizon 4.

What You’ll Need

Before you begin, you’ll need the following:

-Your 2014 Bac Mono
-An Xbox One console
-A copy of Forza Horizon 4

With those requirements out of the way, let’s get started!

Preparing the Mono

The first step is to make sure you have the latest version of Forza Horizon 4. The Mono will be compatible with all versions of the game, but you will need the latest update to get the best results.

Once you have Forza Horizon 4 installed, launch the game and create a new event. In the event menu, select “Add Car” and then scroll down to the 2014 Bac Mono. Once you have found the car, select it and then click on the “Customize” button.

In the Customize menu, you will want to adjust the following settings:

– Suspension: Full stiff
– Brakes: Medium
– Tires: Street
– Transmission: 6 Speed Manual
– Drivetrain: Rear Wheel Drive
– Cockpit View: Behind Car

Tuning the Mono

While the 2014 Bac Mono in Forza Horizon 4 is a beautifully designed car, it’s not perfect. However, with a little bit of tuning, you can make it handle like a dream. Here are some easy steps to follow to get the most out of your Mono:

1. Start by adjusting the camber. The front should be set at -2.0 and the rear at -1.6.

2. Toe needs to be set at 0.06 in for both the front and rear.

3. Now move on to ride height. The front should be set at 4″ and the rear at 4.5″.

4. Next, adjust the springs. The front should be set at 700 N/mm and the rear at 650 N/mm.

5. Finally, tweak the dampers until you find a setting that feels comfortable to you. We recommend starting with 10 clicks from full stiff for both the front and rear dampers.

Fine-tuning the Mono

In order to get the most out of your 2014 Bac Mono in Forza Horizon 4, you’ll need to tune it properly. Here’s a guide on how to do just that.

First, start by adjusting the dampers. If you find that the car is bouncing around too much, you can stiffen them up. But if you’re finding that the car is skidding and sliding around too much, you can soften them up.

Next, adjust the anti-roll bars. These will help keep the car level when cornering. Again, if you find that the car is skidding and sliding around too much, you can soften them up. But if you want the car to corner tighter and with more precision, you can stiffen them up.

Finally, adjust the ride height. You’ll want to lower the car if you want it to be more aerodynamic and perform better at high speeds. But if you’re going to be doing a lot of off-roading, you’ll want to raise the ride height so that the car doesn’t bottom out as easily.

With these tweaks, your 2014 Bac Mono should be performing at its best in Forza Horizon 4!

Conclusion

After following the steps in this guide, you should have your 2014 Bac Mono tuned perfectly for Forza Horizon 4. If you have any questions or comments, please feel free to leave them below. Thank you for reading!

Scroll to Top