Forza Horizon 4 is here and with it comes a new crop of high-powered cars to drift your way around the UK. But if you’re new to the game, or just need a refresher on how to tune a drift car, we’ve got you covered. Check out our guide on how to get your ride drift-ready in Forza Horizon 4.
Checkout this video:
Tuning a drift car in Forza Horizon 4 is key if you want to master the game’s drift circuits. In this guide, we’ll show you how to tune a drift car for maximum performance.
There are four main areas that you need to focus on when tuning a drift car:
-The weight distribution
What is drifting?
Drifting is a driving technique in which the driver purposely oversteers while maneuvering around a turn, causing the back end of the vehicle to slide out. The goal is to maintain control of the vehicle while doing so.
In order to drift properly, one must first understand weight transfer. When going around a turn, the car’s weight shifts from the outside tires to the inside tires. This is why a car tends to understeer when going around a corner – because there is more weight on the front tires and less weight on the rear tires.
To drift, the driver must first induce oversteer by shifting the car’s weight to the rear tires. This can be done by braking hard while turning, or by accelerating while turning. Once oversteer has been induced, it must be controlled using counter-steering and throttle input.
Counter-steering is when you turn the steering wheel in the opposite direction of the turn you are making. For example, if you are drifting around a right-hand turn, you would turn your steering wheel to the left. This shifts the car’s weight to the front tires and helps keep it from spinning out.
Throttle input is also important in drifting. You want to make sure you are not going too slow or too fast. Going too slow will cause you to lose control of your drift, and going too fast will cause you to spin out. Instead, you want to find a happy medium where you are going fast enough to maintain control, but not so fast that you lose it.
Once you have mastered these basics, there are many different techniques that can be used to drift a car around a corner. It all comes down to practice and experimentation – so get out there and start sliding!
The basics of tuning a drift car
If you’re new to Forza Horizon 4, you may be wondering how to tune a drift car. Drifting is a technique where you intentionally oversteer around a corner, making the back end of your car swing out. It’s a stylish and challenging way to race, and if you want to compete at the highest levels, you’ll need to master it.
Tuning your drift car is vital to getting the most out of it. The right tuning can make your car more responsive, make it easier to control, and help you get more points when you drift. In this guide, we’ll teach you the basics of tuning a drift car in Forza Horizon 4.
Drift car setup
In order to get the most out of your drift car in Forza Horizon 4, you’ll need to tune it to your own driving style. In this guide, we’ll show you how to do just that.
There are three main areas you’ll need to tune in order to drift properly: the suspension, the transmission, and the tyres.
Suspension: The first thing you’ll want to do is lower your car’s ride height. This will help you keep better control of your car while drifting. You’ll also want to stiffen up your suspension, as this will help your car handle better while drifting.
Transmission: Next, you’ll want to tune your transmission for better drift performance. The main thing you’re looking for here is a lower final drive ratio. This will help your car’s tires spin more easily, which is key for drifting. You may also want to experiment with different gear ratios to find what works best for you.
Tyres: Finally, you’ll need to make sure your tyres are up to the task of Drift Mode. The best tyres for drifting are usually racing slicks or semi-slick tyres. These tyres will give you the best grip and allow you to drift more easily.
In this Forza Horizon 4 tuning guide, we will show you how to tune your cars for drifting. When it comes to drifting in Forza Horizon 4, there are a few things you need to take into consideration, such as the suspension setup, tire pressure, and ride height.
The suspension setup is one of the most important things you need to get right when drifting in Forza Horizon 4. You want to make sure that your car has a good amount of grip, but at the same time, you don’t want it to be too stiff.
To find the perfect balance, you will need to experiment with different settings. Start by lowering your car’s ride height and then experiment with different combinations of stiffness and dampening until you find a setup that works for you.
Once you have found a good suspension setup, it’s time to move on to tire pressure. Tire pressure is another important aspect of drift tuning in Forza Horizon 4. You want to make sure that your tires are not overinflated, as this will cause them to lose grip. At the same time, you don’t want them to be too low, as this will cause them to wear out quickly.
To find the perfect tire pressure for your car, start by inflating them to the maximum recommended pressure and then slowly let some air out until you find a pressure that gives you good grip without causing too much tire wear.
Ride height is the last thing you need to adjust when drift tuning your car in Forza Horizon 4. You want to make sure that your car is low enough to the ground so that it has a good center of gravity. This will help prevent it from flipping over when going around corners at high speeds.
To lower your car’s ride height, start by adjusting the springs and then use spacers if needed. Again, remember to experiment until you find a setting that works well for your driving style.
Tire choice is critical when fine-tuning a drift car in Forza Horizon 4. Here are some tips to help you make the best tire choice for your drift car.
When drift tuning, always use the softest compound tire available. This will help increase the amount of grip your car has, which is important for staying sideways through a turn. It’s also important to have enough grip to initiate a drift in the first place.
The other tire choice that will affect your tuning is tread pattern. A more aggressive tread pattern will provide more grip, but can also make your car more difficult to control. A less aggressive tread pattern will provide less grip, but will also make your car easier to control. You’ll want to experiment with different tread patterns to find what works best for your driving style and the tune you’re using.
Power and torque
When you’re trying to get the most out of your drift car, you’ll need to tune it for maximum power and torque. The best way to do this is by adjusting the engine’s redline and rev limiters. You’ll also want to play with the air/fuel mixture and ignition timing to find the sweet spot for your car.
Weight distribution is one of the most important aspects of tuning a drift car in Forza Horizon 4. Getting the weight balance right will make a huge difference to how your car behaves on the road.
There are a few different ways to adjust weight distribution in Forza Horizon 4. The first is by using the Roll Cage tuning option. This will allow you to move the weight around within the car, and you can also add or remove weight from specific areas.
The second way to adjust weight distribution is by using the Suspension tuning option. This will let you change the springs and dampers on your car, which will affects its ride height and therefore its weight distribution.
Last but not least, you can also use the Tire pressure tuning option to fine-tune your car’s weight distribution. This is particularly effective if you’re having trouble getting your car to grip the road when cornering at high speeds.
So, there you have it! These are some of the most important things to keep in mind when tuning a drift car in Forza Horizon 4.
In Forza Horizon 4, there are a few things you need to do to make sure your car is drift-ready. One of the most important things you need to do is tune your braking.
You want to make sure that your braking is just right – not too light and not too heavy. If your braking is too light, your car will just slide around corners and not actually drift. If your braking is too heavy, your car will become difficult to control and you’ll likely crash.
To tune your braking, head to the Tune menu in Forza Horizon 4. Then, go to the Suspension tab and adjust the front and rear brake pressure until you find a setting that feels good.
Now that you know how to tune a drift car in Forza Horizon 4, you can put your newly acquired skills to the test and dominate the competition. Remember to experiment with different settings to find what works best for you. With a little practice, you’ll be sliding your way to victory in no time.