Forza Horizon 4 Drag Tune Guide

Here’s a forza horizon 4 drag tune guide so you can make your car go fast and win all the races.

Checkout this video:

Introduction

Horizon 4’s drag racing has seen a significant change in how tuning works. In this guide, we’ll go over the basics of drag tuning and how you can get the most out of your car.

The Basics of Drag Tuning

key points
-Importance of drag tires
-How to adjust tire pressure
-How to adjust gearing

Most people who are new to drag racing don’t realize the importance of proper tire pressure. Having the correct tire pressure is essential to getting good traction and making consistent passes down the track.

Drag tires are designed to work best at a specific range of temperatures. If the tire is too cold, it will not have enough grip and the car will spin or fishtail. If the tire is too hot, it will start to break down and lose its grip. The ideal range for most drag tires is between 60 and 80 degrees Celsius.

To get the best possible launch, you need to adjust your tire pressure so that the tires are in their ideal range. You can do this by using a pyrometer to measure the temperature of the tires after each pass. After a few passes, you should have a good idea of what range of temperature works best for your car and tires.

Once you have the correct tire pressure, you need to make sure that your car is geared correctly for the track conditions. The goal is to have your car in high gear at the end of the quarter mile so that you can maximize your speed.

To do this, you need to experiment with different gear ratios until you find one that works best for your car and track conditions. A good starting point is to gear your car so that it hits peak RPM in high gear just before crossing the finish line.

Weight Reduction

In forza horizon 4 weight reduction improves a car’s acceleration, braking, and top speed. Weight reduction can be accomplished by either removing weight from the car (by removing parts) or by adding light-weight parts. Most likely, you will want to do a combination of both.

There are a few things to keep in mind when reducing weight:

-Every part that you add or remove will have an impact on your car’s performance. Some parts will have a bigger impact than others.
-Your goal should be to find the ideal balance of weight and performance. Don’t sacrifice too much performance in the name of weight reduction.
-In general, it is better to reduce weight at the front of the car rather than at the rear. This will help improve your car’s handling.

With those things in mind, here are some tips for reducing weight in forza horizon 4

-Start by removing any non-essential parts from your car. This includes things like passenger seats, carpets, and excess sound deadening material. Every little bit helps!
-Next, add light-weight components where possible. This includes things like carbon fiber body panels and synthetic engine internals (e.g., forged pistons). These components will typically be more expensive than their standard counterparts, but they will also offer significant performance advantages.
-Finally, consider installing a roll cage or racing seats with harnesses. These components will add weight to your car, but they will also improve its safety and stiffness… which can be beneficial for both performance and handling.

Engine Tuning

As with any racing game, forza horizon 4 offers a deep level of customization for your cars. One important aspect of this is engine tuning, which can be used to improve your car’s performance on the drag strip.

There are three main areas that you need to tune in order to get the most out of your car on the drag strip: the engine itself, the transmission, and the suspension. We’ll go over each of these in turn and give you some tips on how to get the most out of your car.

Engine Tuning

The first thing you need to do is tune your engine for maximum power. This means making sure that your air/fuel mixture is optimal, as well as making sure that your ignition timing is set correctly. You’ll also want to make sure that your fuel pressure is where it needs to be; too low and you’ll lose power, too high and you’ll risk damaging your engine.

Transmission Tuning

Next, you’ll want to tune your transmission for maximum efficiency. This means finding the sweet spot between high gear ratios for top speed and low gear ratios for launch off the line. You’ll also want to make sure that your transmission gears are properly matched to your engine’s power output; if they’re not, you’ll either waste power or risk damaging your transmission.

Suspension Tuning

Finally, you’ll want to tune your suspension for maximum traction. This means making sure that your springs and shocks are tuned correctly for the weight of your car and the type of racing surface you’ll be running on. You’ll also want to make sure that your tires are properly inflated and that your wheel alignment is correct; if not, you’ll risk losing traction and spinning out.

Drivetrain Tuning

Drivtrain tuning is one of the most important things you can do to your car to make sure it’s performing at its best. By adjusting the gearing, final drive, and differential, you can drastically improve acceleration, handling, and top speed. In this guide, we’ll show you how to do it.

Suspension Tuning

The key to success in any drag race is traction. In order to put the power down, you need to have a well-tuned suspension setup that can keep the tires glued to the pavement.

There are a few things you need to keep in mind when tuning your suspension for drag racing. First, you want to make sure that your vehicle is balanced front-to-rear. This can be accomplished by adjusting the spring rates and / or anti-roll bars.

Next, you need to make sure that your tires are able to maintain contact with the ground throughout the entire length of the race. This can be done by properly inflated tires as well as ensuring that your suspension is not too soft or too stiff.

Finally, you want to make sure that your vehicle is able to launch off the line without wheelspin. This can be achieved by properly balancing your power and traction and by using a lower gear ratio.

Tire Selection

One of the most important aspects of setting up your car for drag racing in forza horizon 4 is choosing the right tires. The game offers a wide variety of tires to choose from, and each type has its own strengths and weaknesses. In general, you’ll want to choose a tire that offers good grip and acceleration, while also being able to withstand the high temperatures that drag racing generates.

Here are some of the best tires for drag racing in forza horizon 4

-Continental ExtremeContact DW
-Michelin Pilot Sport 4S
-Pirelli P Zero Trofeo R

Launching Techniques

proper launching techniques are important in any drag race. there are many factors to consider when trying to get the perfect start. things like tire pressure, weather conditions, and even your own driving style can affect how well you launch. with that said, here are some general tips to help you get started.

launch at a lower rpm: this will help prevent wheel spin and launch the car more efficiently. a good rule of thumb is to launch at about half of your maximum engine rpm.

modulate the throttle: don’t just floor it and hold on for dear life. evenly apply pressure to the pedal so you can maintain control of the car. if you start to spin, let off the throttle until you regain traction.

keep it in low gear: shifting into a higher gear too early will cause you to lose speed and increase your ET (elapsed time). for most cars, 1st or 2nd gear is ideal for drag racing.

The Importance of the 60 Foot Time

While most people think of 0-60 mph times when discussing a car’s performance, the 60 foot time is actually much more important when it comes to Drag Racing. This is the time it takes for a car to travel from a standing start to 60 feet, and is a good indicator of how well a car will perform in a drag race.

There are many factors that affect the 60 foot time, including the weight of the car, the power of the engine, the gearing, and the traction. A light car with a powerful engine and good traction will usually have a good 60 foot time, while a heavier car with a less powerful engine and bad traction will usually have a poor 60 foot time.

There are many ways to improve the 60 foot time, including adding weight to the car (to increase traction), increasing the power of the engine, and changing the gearing (to make better use of the engine’s power). Some drag racers also use special tires that are designed for maximum traction.

No matter what you do to improve your 60 foot time, remember that practice makes perfect. The more you race, the better you’ll become at getting off the line quickly and efficiently.

Conclusion

We hope you enjoyed our forza horizon 4 drag tune guide. If you have any questions or suggestions, please feel free to leave us a comment below.

Scroll to Top